Additional Bacteria

 
 
 

Biological Products:

 

 

Bioaugmentation products for Wastewater applications in Papermills, Refineries, Chemical, Tanneries, Municipalities, Textiles, Steel, Agriculture, Animal feedlot,  Gun Powder plant, Food and Beverage- Dairy Products, Orange Juice factory, Wineries, Cookie factory, Vegetable processing plant, Meat packing, Barbecue Restaurant, Aquaculture, Ornamental Ponds for algae control, CAFO, Nursing homes, Military, Campgrounds, Universities, Regulatory agencies

 

Lab Services:

 

 

Filamentous Identification Lab Service. One reason to identify filaments is to determine the filaments characteristics and then determine the type present.  If the type is found out, a root cause can usually be associated with a particular filament.  If the cause is known, then a correction can be made to alleviate problems. Chlorination is only a quick fix.  Without process changes, filaments will grow back after chlorination.

Wastewater Biomass Analyses and Cooling Tower Analyses also available

 

Training Materials:

 

 

Training is an integral part of any job. Not everyone is at the same level of training. Many people want beginning concepts and basics. Some need technical information or troubleshooting. Some want equipment, technology or process information.

We have developed a full set of Basic training, Advanced training, Filamentous Identification the Easy Way as well as custom training CD's Manuals. We also provide hands-on training classes and soon will have an Online "E-University".

 


 

                                                                   

 Bacteria and Additional things found in Wastewater

What's New!

We have just added "Virtual Audits" to our capabilities. Check out our new Services.  We are in the process of developing new courses for our ""Online E-University" in order to meet the needs of our global customers that cannot travel to our public classes.Visit our new website www.WastewaterElearning.com/Elearning

 

Additional things in wastewater microscopy

 

 

What are those strange things I am looking at under the microscope?

 

Many times there will be other things besides floc, filaments or higher life forms. What are they and what do they mean?  Here are some of the things we see quite often in MLSS samples under the microscope.

 

You may see sheets of cells. You may see round, curved, spiral, branched, or even square cells. You may see things that  look like a star fish, in reality it is pollen from a plant

 

If you see oil droplets in a sample- check for process side leaks in Industry, and oil slicks where traffic is stopped in municipalities. Many food plants have high levels of oil


Algae are always easy to pick out, since it may be in many sizes or shapes, but it will be distinctly green! You may see diatoms. Diatoms can come in many shapes and sizes. There may be plant debris, fiber.  Check your screening.

 

You may find carbon particles, debris, crystals.

Yeast is easy to pick out when it is budding even without a Gram stain. Fungi have distinct branching and the walls are thicker than filaments.

 

Tetrads and cyanobacteria are usually found in environments where there are low levels of nitrogen present. They are usually common in a lagoons and are often found in papermill wastewater lagoons. They can cause serious TSS problems if left alone.  Usually increasing nitrogen levels in the influent often causes them to disappear quite quickly as opposed to adding high levels of polymer to try to drop them out.   Cyanobacteria are tolerant of environmental extremes, thermophilic species can grow at temperatures up to 75 degrees C.

You may see Neisser positive cell clusters, these typically indicate a nutrient deficiency.  Papermills are notorious for having tetrads and nutrient problems due to wide swings in loading.

 

Some plants use activated carbon particles.  Dark anaerobic spots indicating septicity and low D.O. somewhere in the system look very different from carbon particles

Hypomicrobium can indicate denitrification, but more often than not, are found in septic conditions where solids holding are too long.  These look like beans on a long string- they are hyphomicrobium and usually indicate septicity. . .. check to see how long you are holding your solids in your clarifier or if your supernatant from your sludge digestor or sludge dewatering tank has gone septic. Sometimes these can grow on methane or C1 compounds, or sulfur compounds bound with methane. Some methylotrophic bacteria can grow utilizing methanesulfonic acid

You may see sand and dirt crystals. Sometimes dead animal parts can be found in older sludge or lagoons.  There are many forms for cysts.

 

We hope you like the new look of our Filamentous Bacteria and Higher Life Form Identification Pages

 

If you would like more information on bacteria, filaments or higher life forms, you might want to consider purchasing our Wastewater Microbiology Training materials.

We also have our lab that can perform a Wastewater Biomass lab analyses of your own MLSS for more information

water

For more information on Filamentous Identification

Zooglea

Yeast and Fungi

More photos to come. . .

 

If you need more information on our Filamentous Identification the Easy Way Training CD or on Internet training on Filamentous bacteria, causes and controls

How and why on Wastewater Biomass Analyses

What is in a name?

 

 

Older Bug of the Month photos from previous years can be found at

Past Issues of Bug of the Month

 

We hope you like the new look of our Bug of the Month Gallery

Now you can order Videos of our Higher Life Forms-Higher Life Form Video CD- $75.95

 

Contact us today to set up a Filamentous Identification of your MLSS and start saving money at your plant~EmailWastewater Training CDs and Custom Manuals us at: admin@EnvironmentalLeverage.com or Call at 630-906-9791

Click on Links below for direct information:

 

1 - Wastewater Biomass Analyses with Filamentous Identification Printable version

 

2 - Set of Stained Filaments-Microscope Slide Set. An excellent tool to train and help identify filaments.

microscope slides

 

3 - © Filamentous ID the Easy Way™ - Training CD a wealth of training information, educational photographs and troubleshootinig your own WWTP.  

 

4 - © Set of 4 Training CD's - These 4 Training CDs are a wealth of training information and educational photographs. Learn how to troubleshooting your own WWTP. The set of 4 CD's include Microscopic Analyses, Wastewater Operators Training,  Filamentous Identification and Higher Life Forms. 

 

FOG removal, grease problems, bioaugmentation supplement 

 

5 - Biological Products, Descriptions, Usage and Applications. Click here for Printable Pdf document.

6 - Wastewater Elearning   Check out our New ELearning wastewater training classes online, pre-approved ofr CEU's in many states

Check out our new Elearning Courses as well

https://www.wastewaterelearning.com/elearning/index.php

 

WAstewater Elearning

***These courses have been pre-approved for  Wastewater CEU's in Alaska,  Arkansas, California, Connecticut, Delaware, Georgia, Hawaii,  Idaho, Indiana, Louisiana, Maine, Massachusetts, Minnesota, Nevada, New Jersey, Kentucky, New York, North Carolina, Rhode Island, South Dakota, Tennessee, Vermont, Washington, Wisconsin and West Virginia. Some states do not require pre-approval. If you need these approved for your state, please contact our office.

These courses are eligible for CEU's, Contact Hours or PDH (Professional development hour) in Alabama, Arizona, Maryland, Virginia, South Carolina, Utah and more to come.

Now approved in Canada for Nova Scotia and Saskatchewan.

**Some states give different credits than others. Not all states give credits solely based upon contact hours. Please contact our office if you need to know the approval codes and credit hours for your specific state.